Note: using an optional snap on wire harness adapter will simplify the wiring. Most snap on wire harness adapters have already converted and color coded the wires from the auto makers in dash wire harness to match typical aftermarket radio wire colors. ** The wire colors listed in the chart above are typical for these vehicles during these years but may not be the exact colors for this vehicle. This is another reason to use a snap on wire harness adapter. **
Showing posts with label wire harnesses. Show all posts
Showing posts with label wire harnesses. Show all posts
Monday, June 7, 2010
1983-1986 Toyota Radio Wire Harnesses
9:04 PM by onesecond
·
0
comments
Labels: 12 volt, aftermarket radio, antenna wire, auto makers, blue gray, exact colors, g power, h power, new radio, power antenna, radio wire colors, rear speaker, snap on, Toyota, wire harness, wire harnesses, yellow stripe
Labels: 12 volt, aftermarket radio, antenna wire, auto makers, blue gray, exact colors, g power, h power, new radio, power antenna, radio wire colors, rear speaker, snap on, Toyota, wire harness, wire harnesses, yellow stripe
Sunday, May 16, 2010
Chrysler-Dodge Radio Wire Harnesses Installation
3:50 AM by onesecond
·
0
comments
Labels: aftermarket radio, amp, auto makers, bolt, Chrysler, chrysler dodge, Dodge, exact colors, factory radio, infinity sound, original radio, plastic connector, radio wire colors, radios, ring terminal, snap on, spade, speaker grills, wire harness, wire harnesses
Labels: aftermarket radio, amp, auto makers, bolt, Chrysler, chrysler dodge, Dodge, exact colors, factory radio, infinity sound, original radio, plastic connector, radio wire colors, radios, ring terminal, snap on, spade, speaker grills, wire harness, wire harnesses
If your original radio had a braided strap bolted to the rear of the radio.
TIP: Crimp a ring terminal to the new radios ground wire and insert a bolt through both connectors to connect the ring terminal of the braided ground wire to the ring terminal attached to the new radios ground wire.
If your original radio had a plastic connector containing a single wire plugged into the rear of the radio.
TIP: Crimp a male tab spade to the new radios ground wire. Slide it into the female tab spade connector that had originally snapped into the rear of the factory radio.
TIP: Crimp a ring terminal to the new radios ground wire and insert a bolt through both connectors to connect the ring terminal of the braided ground wire to the ring terminal attached to the new radios ground wire.
If your original radio had a plastic connector containing a single wire plugged into the rear of the radio.
TIP: Crimp a male tab spade to the new radios ground wire. Slide it into the female tab spade connector that had originally snapped into the rear of the factory radio.
Subscribe to:
Posts (Atom)
