Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the front door trim panel screws.
3. NOTE: The front door trim panel has five two-part pin-type retainers. Then male part of the trim retainer will remain with
Showing posts with label ford taurus v6. Show all posts
Showing posts with label ford taurus v6. Show all posts
Thursday, April 14, 2011
Friday, May 14, 2010
2002 Ford Taurus V6-3.0L VIN U - A/C - Erratic/Inoperative Blower Case
10:43 PM by onesecond
·
0
comments
Labels: 0l, aa, blower motor resistor, cabin filter, climate control, cowl vent, failure, Ford, ford taurus, ford taurus v6, high speed, manual sections, pollen filter, rain hat, rh, rubber seal, silicone rubber, vin, water corrosion, windshield
Labels: 0l, aa, blower motor resistor, cabin filter, climate control, cowl vent, failure, Ford, ford taurus, ford taurus v6, high speed, manual sections, pollen filter, rain hat, rh, rubber seal, silicone rubber, vin, water corrosion, windshield
Some vehicles built between 5/1/2001 and 12/15/2003 may exhibit water in the
blower case or on the passenger side floor, an inoperative climate control blower
motor, a motor that operates on high speed only, and/or a blower motor resistor
failure.
ACTION
Inspect and seal cowl area and install Rain-Hat Extension Seal. Inspect and
replace blower motor and/or blower motor resistor if there is evidence of
water/corrosion. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
blower case or on the passenger side floor, an inoperative climate control blower
motor, a motor that operates on high speed only, and/or a blower motor resistor
failure.
ACTION
Inspect and seal cowl area and install Rain-Hat Extension Seal. Inspect and
replace blower motor and/or blower motor resistor if there is evidence of
water/corrosion. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
Subscribe to:
Posts (Atom)
