BRAKE SYSTEM' '1995-96 BRAKES Mazda - Disc & Drum FRONT DISC BRAKE PADS
Removal & Installation 1. Raise and support front of vehicle. Remove front wheel assemblies. Remove lower lock pin/guide bolt. See Fig. 2 . Pivot caliper upward and support using rope. 2. Remove pads, shims, guide plates or pad guides and "V" springs (if equipped). Replace pad if lining thickness is less than specified. See MINIMUM PAD LINING SPECIFICATIONS (FRONT) table. 3. To install, reverse removal procedure. Use Disc Brake Expander (49-0221-600C) and an old pad to push piston fully inward to install disc pads.
Showing posts with label rope 2. Show all posts
Showing posts with label rope 2. Show all posts
Monday, May 24, 2010
1995 Mazda MX-6 Brakes System Removal & Installation
3:27 AM by onesecond
·
0
comments
Labels: bolt, brake caliper removal, brake hose, brake pads, brake rotor removal, brakes, disc brake caliper, disc brake pads, disc pads, guide plates, mazda, mazda mx 6, minimum thickness, piston, pivot, rope 2, runout, screws, shims, wheel assemblies
Labels: bolt, brake caliper removal, brake hose, brake pads, brake rotor removal, brakes, disc brake caliper, disc brake pads, disc pads, guide plates, mazda, mazda mx 6, minimum thickness, piston, pivot, rope 2, runout, screws, shims, wheel assemblies
Subscribe to:
Posts (Atom)
