Borla Performance Cat-Back™ Exhaust System (Part number 140169) has been designed for the 2006 Mazda MX-5 Miata equipped with a 2.0L 4 cylinder engine and a manual transmission.
Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Borla Performance Cat-Back ™ Exhaust System.
Taking all under car safety precautions, lift the vehicle using a hoist or hydraulic lift. Once this has been done, you may begin the removal of your old exhaust system from your vehicle.
Showing posts with label mazda miata. Show all posts
Showing posts with label mazda miata. Show all posts
Sunday, November 28, 2010
2006 Mazda MX-5 Miata Exhaust System Installation
1:03 PM by onesecond
·
0
comments
Labels: borla performance, cat back exhaust system, exhaust system, installation instructions, mazda, mazda miata, mazda mx 5
Labels: borla performance, cat back exhaust system, exhaust system, installation instructions, mazda, mazda miata, mazda mx 5
Miata NB Oil Pressure Sender Replacement
12:47 PM by onesecond
·
0
comments
Labels: mazda, mazda miata, miata oil, oil pressure gauge, oil pressure sender, vdo sender
Labels: mazda, mazda miata, miata oil, oil pressure gauge, oil pressure sender, vdo sender
The Mazda Miata is a very well balanced car and a good value on a per-smile basis, but the one thing that has bothered me since I bought the car is the fake oil pressure gauge. In a brilliant move which must save $0.50 per car, Mazda replaced the original Miata's oil pressure sender which was a real analog gauge with a nice digital idiot light type unit. To keep the gauge from looking odd with the needle pinned, they install the gauge needle so that it sits in the normal range when there is any amount of oil pressure in the engine. So there is two states to the gauge, "normal" where you have pressure, and "dead" where the gauge and your engine are both "dead". As has been stated elsewhere, this is the worst of all possible solutions. An idiot light would most likely catch your eye rather quickly. But this gauge which never moves is easily forgotten and when the needle does move, chances are it won't be noticed.
90-97 Mazda Miata Curt Manufacturing Part Number 11746 Installation
3:00 AM by onesecond
·
0
comments
Labels: curt manufacturing, frame rail, hitch mounts, hitch plate, mazda, mazda miata, tow loop brackets
Labels: curt manufacturing, frame rail, hitch mounts, hitch plate, mazda, mazda miata, tow loop brackets
INSTALLATION STEPS
1. This hitch mounts to the driver and passenger side frame rail extensions under the tow loop brackets.
2. Under the rear of the vehicle, locate the passenger side tow loop bracket attached to the frame rail extensions. Remove the tow loop bracket by removing (2) nuts from the bumper mounting bolts and (2) 8mm bolts in the frame rail extensions. Replace the (2) nuts removed from the bumper mounting bolts. Repeat the same procedure for the driver's side tow loop bracket. Return brackets to the vehicle's owner for reinstallation if the hitch is ever removed.
1. This hitch mounts to the driver and passenger side frame rail extensions under the tow loop brackets.
2. Under the rear of the vehicle, locate the passenger side tow loop bracket attached to the frame rail extensions. Remove the tow loop bracket by removing (2) nuts from the bumper mounting bolts and (2) 8mm bolts in the frame rail extensions. Replace the (2) nuts removed from the bumper mounting bolts. Repeat the same procedure for the driver's side tow loop bracket. Return brackets to the vehicle's owner for reinstallation if the hitch is ever removed.
Subscribe to:
Posts (Atom)
