2008 Jeep Liberty 2WD/4WD 2" Polyurethane Spacer Lift Installation Instructions

Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is not level (side-to-side) from the factory & is usually not noticed until a lift kit has been installed which makes the difference more visible. Using a measuring tape, measure the front & rear (both sides) from the ground up to the center of the fender opening above the axle. Record this information below for future reference.

2003-09 Dodge Ram 2500/3500 II Mount Kit Installation Instructions

For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove license plate bracket and retain for vehicle owner. Remove bumper from bumper brackets. Retain fasteners.
2. Remove bumper brackets from frame. Diesel and V10 applications: On these applications, you must first remove the top two intercooler fasteners. Then push intercooler up and out to provide clearance to remove bumper bracket bolt assembly. Retain fasteners. Vehicles equipped with tow hooks will need tow hooks and tow hook brackets removed. These cannot be reinstalled with plow mount. Retain tow hooks, brackets and fasteners for reinstallation if snowplow is removed.

3300 SuperGlide Installation Instructions

This guide provides several pages of instructions for the installation of the SuperGlide towing system (part number 3300).
Truck Preparation
1. Check part quantities using the Parts List for the specific vehicle type.
2. Block vehicle wheels. Some vehicles may require you to raise the rear of the truck in order to make it easier to drill for installing the Mounting Brackets on the truck frame.
3. You may wish to remove the wheels, to give yourself greater working room.

2006 Mazda MX-5 Miata Exhaust System Installation

Borla Performance Cat-Back™ Exhaust System (Part number 140169) has been designed for the 2006 Mazda MX-5 Miata equipped with a 2.0L 4 cylinder engine and a manual transmission.
Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Borla Performance Cat-Back ™ Exhaust System.
Taking all under car safety precautions, lift the vehicle using a hoist or hydraulic lift. Once this has been done, you may begin the removal of your old exhaust system from your vehicle.

1996-2000 Honda Civic Performer X Turbocharging System

The Edelbrock Performer X Turbocharging System is a complete Turbo Kit that gives 1996-2000 Honda Civic SOHC
VTEC D16Y8 owners a 60-70 horsepower increase from turbocharging. The Garrett T-28 ball bearing turbo comes pre-assembled
as one unit with a Ni-resist cast exhaust manifold and exhaust elbow, and inlet oil and water lines for the simplest possible
installation. The system includes a high-performance Performer X intake manifold with four additional injectors and a separate
electronic controller to add fuel and retard spark under boosted conditions. The Edelbrock Exhaust manifold and elbow are designed
for maximum flow and high velocity for quicker turbo spool-up. We have included an intercooler, blow-off valve, windshield pillar
mount boost gauge, o-ring sealed compressor flanges, a turbo oil supply adapter, and pre-assembled Russell oil, water, and fuel lines
to make this one of the most complete kits on the market.