6700 Dodge Viper Heat Shields For 1992-1999 Roadster

RIGHT SIDE: 1. Remove top of heater blower box from lower heater box assembly in engine compartment.
2. Remove the bolts from the coolant reservoir so it can be moved around.
3. Disconnect spark plug wires from spark plugs and move out of the way.
4. Loosen the 2nd and 4th upper header flange bolts for mounting bracket installation.
5. Install one mounting bracket on each of the two header flange bolts loosened in Step 4. Position the brackets so that the slot on the end is straight down under the bolt and bracket is flat on top. These brackets will angle forward and down slightly when installed properly. NOTE: Before attempting to install the heat shield onto the brackets, first measure the distance between the threaded holes in the mounting brackets. You should have 9 1/8” from center to center of holes. If you don’t, you can bend the brackets with a pair of pliers or a small hammer. Doing this will make heat shield installation much easier.