ABTI-GM1 General Motors Class II Bluetooth Interface Installation Manual

The ABTI-GM1 is designed to allow full integration of Motorola’s IHF-1000 Bluetooth HandsFree kit (Sold separately) with GM Class 2 vehicles listed inside. The kit will allow users to listen to phone calls through their car stereo. The currently playing radio source will be automatically muted, and the phone volume may be controlled by the radio. OnStar operation is unaffected.

BX1682 Baseplate Installation Instructions

Installation Instructions
Vehicle Weight: The weight of this vehicle is near the Class III, 5,000 lb rating limitations. Some models, depending on options, may well exceed this 5,000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa® II is now rated 10,000 lbs. and either the Aventa® II or the Aventa® LX tow bar must be used for these applications.

Heated Windshield Washer Module Short Circuit Permanently Disable and Remove Module

General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2006-2009 model year Buick Lucerne; Cadillac DTS; HUMMER H2; 2008-2009 model year Buick Enclave; Cadillac CTS; 2007-2009 model year Cadillac Escalade, Escalade ESV, Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, Tahoe; GMC Acadia, Sierra, Yukon, Yukon XL; Saturn OUTLOOK; and 2009 model year Chevrolet Traverse vehicles equipped with a heated washer fluid system (RPO XA7/CHW). A recall was implemented on some vehicles in 2008 to add a fuse to the HWFS control circuit

BC BRONCO Rear Disk Brakes Installation

Basic kit includes:
NOTE: All other parts to complete the rear disk brake install may be purchased at a full service auto parts store or may be purchased directly from BC Broncos as needed or as a complete kit.
2 - BC Broncos caliper hanger bracket (right/left)
NOTE: The caliper hanger brackets come in either “big bearing” or “small bearing” configurations.

2004 Cadillac CTS-V Exhaust System Installation

Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified service center or muffler installer that employs the use of a lift.

Cadillac HS Vortex Meter

The Cadillac® Vortex Meter is a rate and totalizing meter which is capable of measuring liquid, steam and gas. Due to it’s rugged design it is particularly suitable for direct steam measurement. In any steam system the Cadillac® Vortex Meter is the number one technology choice due to Cadillac®’s accuracy, linearity, reliability and rangeability.

BMW iBus Relay Unit Installation Manual

What this unit actually does?
This unit helps you to switch on or off devices, control signals and so on…
How it works?
Unit has three single pole double throw relays with terminal-type connectors: one input and two outputs (normally-opened and normally-closed). By pressing programmed button on steering wheel or board monitor, corresponding relay will be triggered and as result your device will be switched on or off (or some signal controlled).
Is my car compatible with the iBus Relay Unit?

TEC BMW E39 5-Series Cup Holder Installation

As the owner of one of the world’s premier touring automobiles, your ‘5’er’ has the performance and luxury to ensure an ultimate driving experience. Our cup holder is specifically designed to provide the convenience, utility and appearance suited to your BMW.

2009 BMW K1300R/S Akrapovic Slip-On Exhaust System

REMOVAL OF STOCK EXHAUST SYSTEM:
1. Put the motorcycle on a side stand, we recommend a racing stand. Make sure, that surface is solid and flat.
2. Unscrew the bolts of the heat shield from the link pipe and remove the heat shield.
3. Unscrew the bolt from the metal clamp at the muffler - link pipe joint (Figure 3, 4). Unscrew the bolt from the muffler metal clamp and remove the muffler.

Audi A6 C5 Air Conditioner Output Diagnostic Test Mode (DTM)

Initiating output DTM
- Star engine (vehicles up to model year 2001).
- Switch ignition on or start engine (vehicles from model year 2002).
Notes: The engine should not be running, if the actuation of "A/C Compressor Regulator Valve -N280-" or "A/C clutch -N25-" is being checked on vehicles from model year 2002. With engine running the A/C Control Head -E87- does not

Audi 4.2-liter V8 FSI Engine Self-Study Program 921603

The Self-Study Program provides introductory information regarding the design and function of new models, automotive components or technologies. The Self-Study Program is not a Repair Manual! All values given are intended as a guideline only and refer to the software version valid at the time of publication of the SSP.

Audi TT TTweakers Guide

This guide is about tweaking and troubleshooting the original Audi TT, also known as mk.I. The information is snatched from various sources, mostly from Audi related forums on the Internet. Even tough the information is believed to be correct, it is provided with no warranty of any kind.

Looking For Leakers In Ford's Duratec 3.0L Engines

Ford Duratec engines manufactured for the 1999 model year vehicle applications may have a greater tendency to leak. If you have ever experienced the joy of doing a plumbing project you learn very quickly about how the proper amount of heat in the right place will literally leach the solder into the joint to seal the copper pipe properly – or not. It becomes obvious where you failed to do so once you open the main water valve and you suddenly realize you have a leak.

Lead Replacement Petrol (LRP) Technical Bulletin

1. What is Lead Replacement Petrol (LRP)? LRP is simply Premium Unleaded Petrol (PULP) to which the refineries include an additive to provide Valve Seat Recession (VSR) protection.
2. Why do we need LRP? Lead (or more accurately, tetraethyl lead) performed two functions in petrol: Firstly, it boosted the octane level of the petrol. This meant that the refineries could reduce the cost by producing relatively low octane

GM Pass Key Systems Quick Tests

Since the 1986 model year, GM has used the Pass Key system as an anti-theft device. It started using this system on the 1986 Corvette, and in 1988 added this system to the Camaro and Firebird models. Since that time, GM has added this system to many of its models. This system has two functions: first, it has a starter interrupt feature; second, it can disable the fuel injectors electronically if the ECM does not receive the correct signal from the Pass Key system.The Pass

Identifying the Correct Replacement Head Gasket for Certain Remanufactured Engine

On various vehicles when servicing the head gasket on certain Ford remanufactured engines, it is critical to determine the type of remanufactured engine that is being serviced, in order to identify the correct replacement gasket.

Ford 4.2L Intake Manifold and Timing Cover Gaskets

Ford 4.2L truck and van engines manufactured from 1997 to 2001 have had problems with coolant leaking into the engine oil and into the cylinders. A failed intake manifold gasket or a failed timing cover gasket may cause the coolant to leak into the oil, but coolant leaking into the cylinders is almost always caused by failure of the intake manifold gasket. These problems have been widely reported in several service bulletins over the years.

RAM No-Drill Seat Bases Installation Instructions

For your vehicle base installation you will need a 13MM socket wrench.
1. Remove the two pieces of trim covering the inside and outside seat rail legs. These are located where the seat frame meets the floor board. Lift upward and forward toward the dash for easiest removal. Set these aside.
2. Using the 13MM socket, loosen the seat bolts holding the seat frame to the floor board. You need only loosen enough to

2008 Ford Taurus X Windshield Installation

Preparation
1. Always wear eye and hand protection when working with glass. Make sure you have the right glass and moldings and the urethane systems you are about to use are current. Windshield part number is DW1691.
2. Cover the front seats, floorboards, dash and steering wheel with a clean drop cloth or disposable plastic covers.
3. Drape a fender cover over the fender and tape up any vulnerable areas on the vehicle to protect against possible damage. Tape up the defroster vents to prevent debris from falling into the openings.

2001 Ford Taurus V6-3.0L VIN U Front Door Trim Panel Installation

Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the front door trim panel screws.
3. NOTE: The front door trim panel has five two-part pin-type retainers. Then male part of the trim retainer will remain with