If you choose to not follow these detailed instructions, at a minimum, don't overlook the following; items:
1. Set the timing to the new spec, which may be different from the original spec, (new spec; is 18 degrees BTDC at 650 rpm)
2 Install a 12 volt electronic ignition coil
3. Change the spark plug gap to the new spec (0.039"-0,043"),
4. Bypass or remove the ballast resistor from the ignition circuit
Showing posts with label electronic distributor. Show all posts
Showing posts with label electronic distributor. Show all posts
Tuesday, March 8, 2011
Subscribe to:
Posts (Atom)
