Each knock sensor is fitted to the right bank and left bank of the cylinder block to detect engine knocking. This sensor contains a piezoelectric element which generates a voltage when it becomes deformed, which occurs when the cylinder block vibrates due to the knocking. If engine knocking occurs, ignition timing is retarded to suppress it.
Showing posts with label cylinder block. Show all posts
Showing posts with label cylinder block. Show all posts
Wednesday, June 2, 2010
2002 Toyota Tacoma Knock Sensor 1 Circuit Malfunction
2:38 AM by onesecond
·
0
comments
Labels: air fuel ratio, cylinder block, element, knock sensor, left bank, male connector, obd ii scan tool, sensor circuit, Toyota, toyota tacoma, wire connector
Labels: air fuel ratio, cylinder block, element, knock sensor, left bank, male connector, obd ii scan tool, sensor circuit, Toyota, toyota tacoma, wire connector
Saturday, May 15, 2010
2003 Land Rover Discovery V8-4.6L Oil Pan Gasket Service and Repair
1:01 AM by onesecond
·
0
comments
Labels: 2003 land rover discovery, bell housing, bolts, cylinder block, engine oil, fixings, flange, gasket, globule, illustration source, Land Rover, land rover discovery, maneuver, oil pan, pan gasket, ramp, recess, sealant, traces, v8
Labels: 2003 land rover discovery, bell housing, bolts, cylinder block, engine oil, fixings, flange, gasket, globule, illustration source, Land Rover, land rover discovery, maneuver, oil pan, pan gasket, ramp, recess, sealant, traces, v8
Sump Gasket Service Repair No - 12.60.38 Remove
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Remove dipstick.
4. Raise vehicle on ramp
5. Drain engine oil.
6. Raise front of vehicle under body to increase clearance between engine and front axle.
1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.
3. Remove dipstick.
4. Raise vehicle on ramp
5. Drain engine oil.
6. Raise front of vehicle under body to increase clearance between engine and front axle.
Subscribe to:
Posts (Atom)
