DISASSEMBLY: 1. Raise rear of vehicle on flat stable surface and support using jackstands. 2. Use penetrating oil on OE clamps that hold mufflers to overaxle pipe. Loosen clamps, remove the stock muffler isolator brackets from frame and remove the stock muffler from vehicle.
Showing posts with label band clamps. Show all posts
Showing posts with label band clamps. Show all posts
Saturday, March 19, 2011
Wednesday, January 19, 2011
05-06 Chevrolet C6 Corvette Aft-cat System Installation Instructions
1:24 AM by onesecond
·
0
comments
Labels: band clamps, c6 corvette, Chevrolet, inlet pipes, rear muffler, spring hangers, stock, vehicle
Labels: band clamps, c6 corvette, Chevrolet, inlet pipes, rear muffler, spring hangers, stock, vehicle
Installation instructions:
1.) Raise and support vehicle.
2.) Lubricate factory hangers/clamps retaining stock system with penetrating oil.
3.) Using a 10mm wrench, remove fasteners retaining rear factory hangers to vehicle frame.
1.) Raise and support vehicle.
2.) Lubricate factory hangers/clamps retaining stock system with penetrating oil.
3.) Using a 10mm wrench, remove fasteners retaining rear factory hangers to vehicle frame.
Subscribe to:
Posts (Atom)
