The ABTI-GM1 is designed to allow full integration of Motorola’s IHF-1000 Bluetooth HandsFree kit (Sold separately) with GM Class 2 vehicles listed inside. The kit will allow users to listen to phone calls through their car stereo. The currently playing radio source will be automatically muted, and the phone volume may be controlled by the radio. OnStar operation is unaffected.
Sunday, June 19, 2011
BX1682 Baseplate Installation Instructions
Installation Instructions
Vehicle Weight: The weight of this vehicle is near the Class III, 5,000 lb rating limitations. Some models, depending on options, may well exceed this 5,000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa® II is now rated 10,000 lbs. and either the Aventa® II or the Aventa® LX tow bar must be used for these applications.
Vehicle Weight: The weight of this vehicle is near the Class III, 5,000 lb rating limitations. Some models, depending on options, may well exceed this 5,000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa® II is now rated 10,000 lbs. and either the Aventa® II or the Aventa® LX tow bar must be used for these applications.
Saturday, June 18, 2011
Heated Windshield Washer Module Short Circuit Permanently Disable and Remove Module
General Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2006-2009 model year Buick Lucerne; Cadillac DTS; HUMMER H2; 2008-2009 model year Buick Enclave; Cadillac CTS; 2007-2009 model year Cadillac Escalade, Escalade ESV, Escalade EXT; Chevrolet Avalanche, Silverado, Suburban, Tahoe; GMC Acadia, Sierra, Yukon, Yukon XL; Saturn OUTLOOK; and 2009 model year Chevrolet Traverse vehicles equipped with a heated washer fluid system (RPO XA7/CHW). A recall was implemented on some vehicles in 2008 to add a fuse to the HWFS control circuit
BC BRONCO Rear Disk Brakes Installation
Basic kit includes:
NOTE: All other parts to complete the rear disk brake install may be purchased at a full service auto parts store or may be purchased directly from BC Broncos as needed or as a complete kit.
2 - BC Broncos caliper hanger bracket (right/left)
NOTE: The caliper hanger brackets come in either “big bearing” or “small bearing” configurations.
NOTE: All other parts to complete the rear disk brake install may be purchased at a full service auto parts store or may be purchased directly from BC Broncos as needed or as a complete kit.
2 - BC Broncos caliper hanger bracket (right/left)
NOTE: The caliper hanger brackets come in either “big bearing” or “small bearing” configurations.
Friday, June 17, 2011
2004 Cadillac CTS-V Exhaust System Installation
12:43 AM by onesecond
·
0
comments
Labels: 2004 cadillac cts, Cadillac, corsa performance exhaust, corsa performance exhaust system
Labels: 2004 cadillac cts, Cadillac, corsa performance exhaust, corsa performance exhaust system
Prior to installation, be sure your vehicle is parked on a level surface, and the exhaust system is cool. For safety purposes and ease of installation, we urge you to take your vehicle to a qualified service center or muffler installer that employs the use of a lift.
Cadillac HS Vortex Meter
12:34 AM by onesecond
·
0
comments
Labels: Cadillac, energy management system, karman vortices, steam load
Labels: Cadillac, energy management system, karman vortices, steam load
The Cadillac® Vortex Meter is a rate and totalizing meter which is capable of measuring liquid, steam and gas. Due to it’s rugged design it is particularly suitable for direct steam measurement. In any steam system the Cadillac® Vortex Meter is the number one technology choice due to Cadillac®’s accuracy, linearity, reliability and rangeability.
Tuesday, May 31, 2011
BMW iBus Relay Unit Installation Manual
What this unit actually does?
This unit helps you to switch on or off devices, control signals and so on…
How it works?
Unit has three single pole double throw relays with terminal-type connectors: one input and two outputs (normally-opened and normally-closed). By pressing programmed button on steering wheel or board monitor, corresponding relay will be triggered and as result your device will be switched on or off (or some signal controlled).
Is my car compatible with the iBus Relay Unit?
This unit helps you to switch on or off devices, control signals and so on…
How it works?
Unit has three single pole double throw relays with terminal-type connectors: one input and two outputs (normally-opened and normally-closed). By pressing programmed button on steering wheel or board monitor, corresponding relay will be triggered and as result your device will be switched on or off (or some signal controlled).
Is my car compatible with the iBus Relay Unit?
Subscribe to:
Posts (Atom)
